Electric Vehicle Charging Infrastructure - Delivered

Low Cost

up to

40%

Project cost reduction

Fast Delivery

save up to

50%

Construction time

High Quality

always

100%

Consistent, top-tier build

...Pick 3

PRODUCTS

PRODUCTS OVERVIEW

Our mission is to lower your cost of construction and time on the jobsite for EV charging projects, all while providing consistent high-quality products for your customers. This is more than simply providing pre-fabricated power distribution systems, it's also about a means and methods approach, a simplified product offering, and a way for you and your customers to understand what's needed upfront. Selecting a system is easy, done in a few easy steps, quoted within 24 hours and delivered as a full kit to you. You provide and install the primary conduit/wire, the branch circuit conduit/wire and the installation labor.

If you need a complete system

150KVA System PD Skid - with termination trough.png

If you already have chargers

Fully Integrated EV Power Distribution Skids

Pick your system, pick your EV charge port type, then pick your options. Click on photos for technical details and datasheets. Don't know where to start? Use our EVSE Configurator HERE.

All EVSE panels, EMS, and LTE Enclosures by Atom Power Inc.

1 CHOOSE YOUR POWER SYSTEM

2 CHOOSE YOUR EV PORT TYPE

3 CHOOSE YOUR OPTIONS

4 CHOOSE YOUR SOFTWARE

5 DELIVERY WITHIN 8 WEEKS

Up to (12) 48A ports or up to (6) 80A ports for standard systems and up to (24) 48A ports or up to (12) 80A ports for XL systems. 480VAC or 208VAC output depending on SKU. All systems are service entrance (SE) ready, outdoor/indoor rated, include integrated energy management system (EMS) and have single LTE connection. See Technical Details table below for datasheets.

75KVA Systems

480VAC System

208VAC System

112KVA Systems

480VAC System

480VAC XL System

208VAC System

208VAC XL System

150KVA Systems

480VAC System

480VAC XL System

Fully-Integrated EV Power Distribution Skids
Technical Details

Catalog #	System kVA	Input Circuit (A)	Input Voltage	Secondary voltage	Ports (48A)	Ports (80A)	EMS ready
KPS-75-480-240-AP1-48-EMS	75KVA	125	480	240	2-12 Ports	-	✓
KPS-75-480-240-AP1-80-EMS	75KVA	125	480	240	-	2-6 Ports	✓
KPS-75-208-X-AP1-48-EMS	75KVA	300	208	-	2-12 Ports	-	✓
KPS-75-208-X-AP1-80-EMS	75KVA	300	208	-	-	2-6 Ports	✓
KPS-112-480-240-AP1-48-EMS	112KVA	175	480	240	2-12 Ports	-	✓
KPS-112-480-240-AP1-80-EMS	112KVA	175	480	240	-	2-6 Ports	✓
KPS-112-480-240-AP1-48-EMS-XL	112KVA	175	480	240	2-24 Ports	-	✓
KPS-112-480-240-AP1-80-EMS-XL	112KVA	175	480	240	-	2-12 Ports	✓
KPS-112-208-X-AP1-48-EMS	112KVA	400	208	-	2-12 Ports	-	✓
KPS-112-208-X-AP1-80-EMS	112KVA	400	208	-	-	2-6 Ports	✓
KPS-112-208-X-AP1-48-EMS-XL	112KVA	400	208	-	2-24 Ports	-	✓
KPS-112-208-X-AP1-80-EMS-XL	112KVA	400	208	-	-	2-12 Ports	✓
KPS-150-480-240-AP1-48-EMS	150KVA	225	480	240	2-12 Ports	-	✓
KPS-150-480-240-AP1-80-EMS	150KVA	225	480	240	-	2-6 Ports	✓
KPS-150-480-240-AP1-48-EMS-XL	150KVA	225	480	240	2-24 Ports	-	✓
KPS-150-480-240-AP1-80-EMS-XL	150KVA	225	480	240	-	2-12 Ports	✓

Page 1 of 1

EV Charge Ports

Once you've picked your system, select your EV charge port type here, then pick your options. All EV charge ports by Atom Power, Inc. Full product details and datasheets are here. Pedestal charge port installation instructions are here and wallbox installation instructions are here.

an EVSE charge port, EV pedestal, Kennedy Power Systems, KPS, EV charging infrastructure system, EVSE

Two (2) J1772 charge ports, each with 25' cabling.

Pedestal can be configured for either:

Simple, straightforward, low maintenance, built like a brick.

Two (2) J1772 charge ports, each with 25' cabling.

Pedestal can be configured for either:

Low maintenance, built like a brick.

Cable-management construction is best in class, highest reliability.

Dual Pedestal

Dual Pedestal with Cable Management

Dual Port Wallbox

Two (2) J1772 charge ports, each with 25' cabling and plug holder.

Pedestal can be configured for either:

Simple, straightforward, low maintenance, built like a brick.

an EVSE wallbox, EV pedestal, Kennedy Power Systems, KPS, EV charging infrastructure system, EVSE

Standard Options

Once you've picked your system and selected your EV charge port type, now it's time to pick your options.

OP1 - Electrical Grounding Kit

Everything you need for your new skid service ground. Kit includes:

2 ground rods
2 ground rod connectors
30' of grounding electrode conductor (#2 AWG CU bare or #1/0 AWG CU bare, depending on skid SKU).

an EVSE power distribution electrical grounding kit, Kennedy Power Systems, KPS, EV charging infrastructure system, EVSE

OP2 - Skid Mounting On Ground

Everything you need to avoid pouring concrete pads. Kit includes:

(4) - ICC certified helical ground screws (3" x 63" ea.)
(4) support flanges (6" x 6")
Hardware for anchoring skid to ground.

Ground screw installation video here installation manual here.

an EVSE power distribution skid ground support kit, Kennedy Power Systems, KPS, EV charging infrastructure system, EVSE

OP3 - Skid Mounting on Concrete

Everything you need to mount your skid on existing concrete.

Kit includes:

(6) - 3/8" x 3" concrete anchors
(6) - skid brackets
Hardware for anchoring the skid to brackets

an EVSE power distribution skid concrete support kit, Kennedy Power Systems, KPS, EV charging infrastructure system, EVSE

OP4 - Pedestal Mounting on Ground

Everything you need to mount your charge port pedestals on the ground without pouring concrete.

Kit includes:

(1) - ICC certified helical ground screw (3" x 63")
(1) - pedestal mounting flange. Allows for up to 2 - 1.5" conduits for entry
Hardware for anchoring pedestal to the ground screw

(per pedestal)

Ground screw installation video here installation manual here.

an EVSE charge port pedestal ground support kit, Kennedy Power Systems, KPS, EV charging infrastructure system, EVSE

OP5 - Pedestal Mounting on Concrete

Everything you need to mount your charge port pedestals onto existing concrete.

Kit includes:

(4) - 3/8" drop-in concrete stud anchors

(per pedestal)

an EVSE charge port pedestal concrete support kit, Kennedy Power Systems, KPS, EV charging infrastructure system, EVSE

OP6 - Electrical Permit Drawings

If you need electrical permit drawings for your project, we can provide fast, effective, and for low cost. Our electrical permit drawings are designed, reviewed and sealed by our professional engineering firm partners, licensed within the project state (US states only). Drawings are for electrical permitting only and apply only to the systems and scope as purchased from Kennedy Power Systems. Standard permit drawing pricing is based on anticipating connecting the EV power distribution skid to a new or existing utility service. If feeding from existing building infrastructure (i.e. not from utility service), permit drawing pricing and lead time would be considered "custom" for that project. See below for standard permit drawing lead times based on US state. Standard permit drawing purchase includes the drawing list as described below.

E0.1 General Specifications

This sheet is provided to describe the scope of the project, symbols list, abbreviations, and specifications for general items such as conduit, wire, fittings, connectors, etc. Additionally, if state energy code calculations are required by your local jurisdiction, they will appear on this sheet.

Kennedy Power Systems - EV General Specifications.png

E0.2 EVSE Specifications

This sheet is provided to specify the construction and performance of the electric vehicle supply equipment (EVSE) to be used on the project. Additionally, the sequence of operations for the energy management system (EMS) is detailed here as required by most AHJ's who have adopted the 2023 NEC.

Kennedy Power Systems - EV Specifications.png

E0.3 Ground Support Specifications

This sheet is provided to specify the construction and performance requirements of ground support systems used. This sheet is dependent on installation type and would be used if your power distribution skid and/or pedestals are installed directly on the ground.

Kennedy Power Systems - Ground Support Specifications.png

EV.S1 Site Plan

This sheet is provided to illustrate the project site at scale and the layout of the electric vehicle charging equipment. Includes existing or new service location, mounting location of EV power distribution skid, pedestal or wallbox locations, and conduit routing plan.

Kennedy Power Systems - EV floor plan.png

EV.1 Riser Diagram

This sheet is provided to illustrate the electrical riser (one-line) diagram, feeder schedule, connected load calculations, EMS load calculations, network connectivity, panel schedules, electrical grounding connections, and ground/concrete support details.

Kennedy Power Systems - EV riser and panel schedules.png

Standard Permit Drawing Delivery Lead time by US State:

1 Week Lead Time

AL, FL, GA, KY, LA, NC, NY, SC, TN, TX, UT, VA, WV

3 Week Lead Time

AK, AZ, AR, CO, CT, DE, ID, IL, IN, IA, KS, ME, MD, MA, MI, MN, MS, MO, MT, NE, NV, NH, NJ, NM, ND, OH, OK, OR, PA, RI, SD, VT, WA, WI, WY

4 Week Lead Time

CA, HI

Electrical only permit drawings are delivered under this option. Check local requirements for ADA, ABA, land development and/or other local processes that could impact the timing of receiving permit approval and could require construction documents other than electrical.

Software

All charge point management software and subscription sales are direct from Atom Power Inc. to Owner. That is, Kennedy Power Systems does not sell this software and is instead meant to represent software as provided by Atom Power to Owner.

Atom Insight

Atom Insight Software Subscription includes the following: Remote visibility and control of Atom EV charging stations. 24/7/365 network monitoring, Atom Drive App, Remote troubleshooting, Local Access Control, Driver Access Groups, Multi-Site Management, Multi-User Account Management, Analytics & Reporting, Industry-leading Cybersecurity and Energy Management (Safety Critical & Dynamic).

Atom Insight Plus

Atom Insight + Mobile Control Software Subscription for L2 Products. Adds Driver App and Host management capabilities to manage access to charging stations and fee policies.

Premium Host Support, Analytics & Reporting, Driver Reservations, Local Access Control, Driver Support, Remote Troubleshoot, Extended Host Support, Revenue Collection, Direct Deposit, Driver Access Groups, Multi-Site Management, Multi-User Account, Tiered Pricing, Time-of-Use Rates, Session limits & Idle Fees, Revenue collection

NOTE: Additional credit card transaction fees apply.

EVSE-Ready Power Distribution Skids

Got your own chargers, an EMS, network connectivity and only need the power distribution? No problem! KPS EVSE Power Distribution Skids (EVPDS) have all you need for just the power delivery components. We also have a pre-wired terminal option if you never even want to open the panel, saving even more time onsite!

150KVA XL System PD Skid - with termination trough.png

1 CHOOSE YOUR POWER SYSTEM

2 CHOOSE YOUR OPTIONS

112KVA XL System PD Skid - with termination trough.png

3 DELIVERY WITHIN 8 WEEKS

Up to (14) EVSE ports for standard systems with EMS* and up to (28) EVSE ports for XL systems with EMS*. Choose from 40A, 50A, or 60A branch circuit breakers. 480VAC input, 240VAC output. Terminal Block models include a pre-wired terminal block at the base of the skid to save you time! All systems are service entrance (SE) ready and outdoor/indoor rated. Click on photos for datasheets.

*Energy Management System (EMS) not included within EVPD skids